Regular nail polishes take a long time to dry. You can fix this problem by using a dry polish to save time when applying your regular polishes.
There are two kinds of polish dryers: drop or spray. It should always be applied after the last coat of polish or after the last coat of top coat. They contain fatty substances and should not be applied between 2 layers of nail polish.
Application of SolarSpeed Spray from CND or Accel Erate from Morgan Taylor as a spray
- After the last coat of polish, wait about 1 minute.
- Spray the SolarSpeed Spray, without getting too close or too far.
- Your polish should be dry after about 5 minutes.
Application of Morgan Taylor Accel Erate as a drop or Nails Alive Polish Dryer
- After the last coat of polish, wait about 1 minute.
- Drop one to two drops of polish dryer on the nail.
- Your polish should be dry after about 5 minutes.
If your nail polish wrinkles, it is because your polish was not enough dry between the 2 layers. It is really important to wait until the first coat of polish is completely dry before applying the second.
Tip: the VFP French Permanent Polish
If you lack patience, we advise you to use our VFP permanent French polishes. These are regular nail polishes, very covering which dry extremely quickly. One coat may be enough. The first nail is usually dry when you finish the last one, so it's very quick.
To get a dry polish, click below! ?
