oh blush sparkle how to apply

5 ways to use Oh Blush Sparkle powder

We show you 5 ways to use Oh Blush Sparkle powders in this video: Resin soak, gel soak, chrome effect, chameleon and sugar effect.

Dip powder and resin

  1. Directly on the prepared natural nail or directly on the tips
  2. Apply the resin to the nail.
  3. Sprinkle with Oh Blush powder.
  4. Repeat steps 2 and 3.
  5. Apply a new layer of resin
  6. Apply a layer of clear powder (so you don’t have to file off the sparkles).
  7. Apply a new layer of resin.
  8. Create your stress point with the clear powder.
  9. A layer of resin.
  10. Catalyze with the spray activator.
  11. Make your filing and finish.

Dip powder and gel

As the gel is hypoallergenic, it can be very interesting to use if you are allergic to the resin or the activator.

  1. Directly on the prepared natural nail or directly on the tip.
  2. Apply a thin layer of Oh Blush Soaking Gel to the nail.
  3. Sprinkle Oh Blush powder
  4. Apply a good drop of gel and tap so as not to move the powder.
  5. Don’t forget to wipe off your brush.
  6. Put the nail under the lamp for 1 minute.
  7. Repeat the gel and powder steps as many times as necessary.
  8. Seal with a layer of clear powder (so you don’t have to file off the sparkles).
  9. Apply a new layer of gel.
  10. Create your stress point with the clear powder.
  11. A layer of gel.
  12. Put the nail under the lamp for 1 minute.
  13. Use a cotton ball soaked in 99.9% alcohol or Ongles d’Or Perfect Cleaner
  14. Make your filing and finish.

Chrome Effect

  1. The chrome effect is best seen on a black nail.
  2. Apply a coat of Fini-Plus or Oh Blush Gel top coat to the nail.
  3. Do a half-cooking, 15 seconds with an 18 watt LED or about 1 minute with a 36W UV lamp.
  4. Sprinkle with Oh Blush powder.
  5. Remove the excess with a duster, this is enough to create your chrome effect.
  6. Seal with a coat of Fini Plus and cook the regular time.
  7. If you are working with resin and powder, you can apply your UV resin without filing the Fini-Plus. However, do not apply your UV resin directly to the Sparkle powder, making it grainy.

Chameleon Effect

  1. The chameleon effect is best seen on a black nail.
  2. Apply a coat of Fini-Plus or Oh Blush Gel top coat to the nail.
  3. Do a half-cooking, 15 seconds with an 18 watt LED or about 1 minute with a 36W UV lamp.
  4. Sprinkle with Oh Blush powder.
  5. Vigorously scrub with the duster or a manicure brush to create your chameleon effect. You can also apply your powder by tapping it with your finger.
    Seal with a coat of Fini Plus and cook the regular time.
  6. If you are working with resin and powder, you can apply your UV resin without filing the Fini-Plus. 

Sugar Effect

  1. The chameleon effect is best seen on a black nail.
  2. Apply a coat of Fini-Plus or Oh Blush Gel top coat to the nail.
  3. Cook completely, either 30 seconds with an 18 watt LED or 2 minutes with a 36W UV lamp.
  4. It’s over.

The sugar effect holds a little less well with the resin and powder because we cannot come and seal with the uv resin because it must remain grainy. We advise you to do a soak first, then to make the sugar effect afterward. So if your sugar effect wears off, your nail will stay beautiful.

With Oh Blush soaking gel, the sugar effect holds very well.

To purchase the items presented, click below! ?

Share this:
Facebook Comments
5 ways to use Oh Blush Sparkle powder

You May Also Like